2026 Kubota Wheel Loaders R430

Information

2026 Kubota Wheel Loaders R430

Compact design with impressive power allows the R430 to get the work done where larger loaders cannot fit. The R430 also delivers big on comfort in every season with an available enclosed cab featuring heat and A/C.

Features may include:

Powerful Kubota Engine

The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.

Comfortable Work Station

Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.

Load Sensing Transmission

As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.

Limited Slip Differential

Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction.

Hybrid Link Design

The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.

Rear Backhoe

The RBK4009SA backhoe allows the operator to dig a trench up to seven feet deep and 24 inches wide.

Photos

Highlights

  • Sauk City, Wisconsin
  • 2026
  • Kubota
  • Wheel Loaders R430
  • D1830-CR-TIE4-WL5
  • Hydrostatic transmission
  • Available
  • Hinge Pin: 9ft2in | Dump at Fully Raised Position: 7ft2in

Specifications

  • 2026
  • Kubota
  • Wheel Loaders
  • R430
  • Compact
  • D1830-CR-TIE4-WL5
  • Tier 4
  • Output (SAE J1995 gross: 47.6 hp (35.5 kW) / 2600 rpm | Output (SAE J1349 net): 44.5 hp (33.2 kW) / 2600 rpm
  • 11 cu. in.
  • Hydrostatic transmission
  • 12.5/70-16-8PR
  • Traveling - High: 12.4 mph (20.0 kph) | Traveling - Low: 3.0 mph (4.8 kph)
  • Traction Force: 5485 lbs (24.4 kgf) | Tipping Load - Straight: 5335 lbs (2420 kgf)/5743 lbs (2605 kgf) / 3494 lbs (1585 kgf)/3770 lbs (1710 kgf) | Tipping Load- Full Turn: 4596 lbs (2085 kgf)/4949 lbs (2245 kgf) / 3009 lbs (1365 kgf)/3251 lbs (1475 kgf) | Rated Operating Capacity: 2298/2474/504/1625 Roc | Bucket Breakout Force: 5215 lbs (23.2 kN) | Lifting Capacity at Ground Level: 3687 lbs (16.4 kN) | Loader Raise / Lower: 4.4 Time / 3.3 sec
  • Auxiliary Hydraulics Rate: 11.1 gpm (42.1 lpm)
  • Auxiliary Hydraulic: 2697 kgf (18.6 cm2)
  • Enclosed wet disc
  • Articulation Angle (deg.): 40 (each direction) | Angle of Rear Frame Oscillation (deg.): ±8 | Loader Clearance Circle: Loader Clearance Circle, ft (mm) 12' 1" (3695) | Maximum Dump Angle: 44 degrees | Reach Fully Raised at Maximum Dump Angle: 2ft9in | Steering Angle: 40 degrees | Frame Oscillation Angle: 8 degree
  • 14' 4" (4355 mm)
  • 8' 3" (2515 mm)
  • 4' 12" (1520 mm)
  • 11" (280 mm)
  • Track Circle: 10' 1" (3085 mm)
  • Hinge Pin: 9ft2in | Dump at Fully Raised Position: 7ft2in
  • Standard Bucket Capacity: 0.5 yd3
  • Tank: 14.3 gal (54 l)
  • System: 15.3 gal (58 l) | Hydraulic Reservoir: 11.1 gal (42 l)
  • Operating: 7758 lbs (3519 kg) / 8232 lbs (3734 kg)
  • Front/Rear Axle Traction Lock: Limited slip differential